Conveyors
Found 52 Listings
Click on equipment name or thumbnail photo to view details.
Click on equipment name or thumbnail photo to view details.
This is a Tuffman "Mini" 3-man sorting system: 20' long x 32" wide picking table with three 16" x 60" chutes with 52" clearance for gaylords or dumpsters....
$18,350
This is a Tuffman "Mini" 4-man sorting system: 25' long x 32" wide picking table with four 16" x 60" chutes with 52" clearance for gaylords or dumpsters....
$19,850
This is a Tuffman 12-man sorting system. 64' long x 42" wide 12-man picking table with 12 sorting chutes (6 on each side), Tuffman standard infeed conveyor,...
$109,000
This unit is a NEW Tuffman 32' belt over roller heavy-duty incline conveyor powered by a 20 hp 3-phase electric motor with 25 to 1 shaft-mounted gear reduced...
$42,000
This is a NEW Tuffman 6-man sorting system. 34' long x 42" wide 6-man picking table with 6 sorting chutes (3 on each side), two-ply 3/16" x 1/16" 220 PIW...
$69,500
This is a Tuffman 8-man HD-P portable sorting system. 32' long x 42" wide 8-man portable picking table with 8 sorting chutes (4 on each side), infeed hopper...
$57,700
This is a Tuffman 8-man sorting system. 44' long x 42" wide 8-man picking table with 8 sorting chutes (4 on each side), Tuffman standard infeed conveyor,...
$78,500
20' long x 42" wide incline conveyor. 36" wide rough top belting, powered by 2 hp, 230, 3-phase electric motor. Good condition.
$4,800
This unit is a Tuffman CBS 30" permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$9,800
Tuffman 532ED Extreme Duty Conveyor- Conveyor is 32' long x 5' wide powered by a 20 hp 3-phase electric motor with size 6 shaft mounted gear reducer with...
$78,500
This 10' long x 16" wide slider bed conveyor is powered by a 1/3 hp, single-phase electric motor and comes equipped with a 12" wide belt.
$950
This 10' long x 16" wide slider bed conveyor is powered by a 1/3 hp, 208-230/460 V, 3-phase electric motor and comes equipped with a 12" wide belt.
$850
This 11' long x 22" wide conveyor is powered by a 1/2 hp, 115/230 V, single-phase electric motor and comes equipped with an 18" wide belt. Good condition....
$2,750
This unit is a 12' long incline conveyor powered by a 3-phase electric motor. 9' long incline portion and 3'-3" long on horizontal section x 36" wide....
$3,850
This 14' long x 20" wide incline case conveyor is powered by a 1 hp, 230/460 V, 3-phase electric drive motor. It is equipped with Jack-Shaft post sections;...
$3,300
14’ Incline Conveyor. 14’ long, 18 ½ “ wide, 16” wide belt. Powered by a ½ hp, 115/230 V, single-phase Century motor.
$2,450
This auger is 15' long x 13" diameter and is powered by a 1/2 hp electric motor.
$3,500
15' Conveyor - 15' long X 26" wide (belt is 22"). Powered by a 1 hp, 220 V, 3-phase electric motor. Good Condition.
$2,500
15' long x 24" wide incline conveyor with cleated belting. Powered by a 1.5 hp, 240/460 V, 3-phase electric motor. 24" wide heavy-duty belting with 2"...
$5,800
This covered conveyor is 18'-6" long and is powered by a 3 hp, 208-230/460 V, 3-phase electric motor. It is equipped with a 25" belt with 2" cleats on...
$9,800
18' long x 33" wide incline conveyor. Powered by a 2 hp, 208-230/460 V, 3-phase electric motor. 29 1/2" belt. 10" side skirting. Discharge height is 64"....
$3,400
18' long x 33" wide incline conveyor. Powered by a 2 hp, 208-230/460 V, 3-phase electric motor. 4" side skirting. Good condition.
$3,800
18' long x 36" wide incline conveyor with 3" cleats spaced 36" apart. 16" side skirting. Powered by a 2 hp, 208-230/460 V, 3-phase electric motor. Good...
$8,800
This 18' long x 30" wide aluminum frame conveyor was manufactured by HFA (Harvard Factory Automation) in 2004. Powered by a 1/6 hp, 3-phase electric motor. Seamless...
$3,800
18' long x 20" wide x 23" tall stainless steel enclosed conveyor powered by 1-1/2 hp electric motor. Good condition. Applications include: food service,...
$4,900
This auger is 20' long x 8" diameter and is powered by a 1/3 hp electric motor.
$3,200
This auger is 20' long x 6" diameter and is powered by a 1/2 hp electric motor.
$3,250
20' long x 30" wide incline conveyor with 3-ply, heavy-duty belting. Comes equipped with legged head pulley and tail pulley, hydraulic power, feed hopper....
$6,800
This unit is a 20x80 Eriez stainless steel conveyor with vibrating chute, powered by a 1/2-hp, 208-230/480V three-phase Leeson gear motor with Warner brake....
$4,800
This 21' long x 42" wide conveyor is powered by a 2-hp, 208-230/460 volt, three-phase electric motor. It is equipped with a 37-1/2" wide rough-top belt,...
$9,250
Lewco 27' Incline Conveyor - 7' long x 36" wide horizontal feed conveyor onto a 19' 7" long x 36" wide (belt 32") incline conveyor (adjustable discharge...
$9,800
Lewco 29' Incline conveyor - 8' long x 33" wide horizontal feed conveyor onto a 20' 6" long x 38" wide incline conveyor. Incline conveyor powered by a...
$12,800
This 5' long x 24" wide EMI Corp. Conveyor is powered by a 1/2-hp three-phase electric motor.
$2,250
52' Long x 41" Wide Incline Conveyor. 41" long with 37" belting. Powered by 1 hp, 230/460 volt, 3 phase electric motor, Good condition.
$12,800
63' Portable Incline Conveyor- 63' long x 24" wide incline conveyor with 18" Chevron belting. Powered by a Wisconsin 4-cylinder engine and mounted on a...
$9,800
This screw auger is 7' long x 10" diameter, is powered by a 1-hp electric motor, and comes equipped with an infeed spout.
$3,400
This screw auger is 8' long x 10" diameter, is powered by a 1-hp electric motor, and comes equipped with an infeed spout.
$3,400
Matthews 8' long x 20" wide incline conveyor with 3" side rails, powered by a 1/2-hp, 220/480 volt, three-phase electric motor. Like new - never been used!...
$2,750
This 12' long x 16" wide Alvey belt conveyor is powered by a 1/2-hp three-phase electric motor. Comes with controls. Good condition.
$2,300
This used conveyor drive unit is powered by a 2-hp three-phase electric motor. It has a 19" wide x 12" diameter head pulley and a shaft-mounted Dodge...
$1,250
Mayfran 35' long x 36" steel belted conveyors with 2" steel cleats spaced every foot.11' horizontal x 22' incline x 3' discharge horizontal x 12' discharge...
$29,500
This incline conveyor is 6' long x 8" wide and is powered by a 1/2-hp 208-230/460 volt electric motor with a standard speed of 60 FPM. It is equipped...
$1,500
This Novatec Model VPU-15 vacuum power unit is powered by a 15-hp electric motor and comes equipped with a Universal RAI blower and cyclone. 3" O.D. inlet...
$6,750
This 13-1/2' long x 26" wide paddle conveyor is powered by a 10-hp electric motor and is in good condition.
$3,970
Powerscreen Mark II conveyor 27' 8" long x 26" wide incline conveyor with 13' to 16' discharge height. 18" belt with side skirting. Feed hopper. Hydraulic...
$14,500
Powerscreen Model Mark II 44' long x 35" wide incline conveyor with 13' to 16' discharge height. 24" belt with side skirting. Feed hopper. Hydraulic power...
$16,500
This unit is a Skako Model 50E vibrating table powered by a 300 volt, single-phase electric motor. Vibrating table is 60" x 60", 38" x 45" inside the trough...
$3,500
This 10'-6" long x 12" wide slider bed conveyor is powered by a 1/3-hp, 115 volt, single-phase electric motor and comes equipped with a 10" wide belt.
$900
This conveyor is powered by a 1.5-hp 230/460 volt electric motor. It is equipped with three 7"-wide conveyor belts. One belt is 11' long and two are 15'-9"...
$5,600
Hydraulic drive hook/chain in-feed system. Can be mounted stationary or portable. Variable feed rates from 100-1000 tires per hour. "Like new" condition...
$5,500
This two-deck disc classifier is powered by a 3/4-hp, 208-230/460 volt, three-phase electric motor. Top deck has six shafts and bottom deck has four shafts,...
$7,500
This rubber-sidewall incline conveyor is 6' long x 8" wide with the sidewalls, 5" wide without the sidewalls. It is powered by a .33-hp single-phase electric...
$2,700