Found 37 Listings
Click on equipment name or thumbnail photo to view details.
Click on equipment name or thumbnail photo to view details.
This is a Tuffman "Mini" 3-man sorting system: 20' long x 32" wide picking table with three 16" x 60" chutes with 52" clearance for gaylords or dumpsters....
$18,350
This is a Tuffman "Mini" 4-man sorting system: 25' long x 32" wide picking table with four 16" x 60" chutes with 52" clearance for gaylords or dumpsters....
$19,850
This unit is a Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with cleats...
$11,800
This unit is a NEW Tuffman Model 722 stationary trommel screen powered by a 10 hp, 3-phase electric motor with a 25 to 1 gear reducer. Trommel barrel is...
$44,500
This 14' long x 20" wide incline case conveyor is powered by a 1 hp, 230/460 V, 3-phase electric drive motor. It is equipped with Jack-Shaft post sections;...
$3,300
This 18' long x 30" wide aluminum frame conveyor was manufactured by HFA (Harvard Factory Automation) in 2004. Powered by a 1/6 hp, 3-phase electric motor. Seamless...
$3,800
This auger is 20' long x 8" diameter and is powered by a 1/3 hp electric motor.
$3,200
This unit is a 20x80 Eriez stainless steel conveyor with vibrating chute, powered by a 1/2-hp, 208-230/480V three-phase Leeson gear motor with Warner brake....
$4,800
Barber Green Rotary Kiln with dryer; 24' long X 7' diameter rotary kiln with refractory brick lining and flightings, drive mechanism with trunions and...
$68,000
24' long x 66" diameter rotary kiln with steel flighting and 36" disc cone deflector. Large infeed is 52" opening and discharge is 9" x 9". 2 Allis Chalmers...
$84,000
This blower is powered by a 40-hp, 240/460v three-phase electric motor. Side outlet is 18-1/2" diameter, top outlet is 16-1/4" diameter. Fan blades...
$3,450
48' long x 9' diameter rotary kiln. Carbon steel kiln with 10 1/2" flights and discharge chutes. Includes drive mechanism with 4 heavy duty trunions and...
$174,000
Al-Jon Model 20 Poprtable Car crusher- powered by a Detroit Model 471 diesel engine and comes equipped with controls, new seals recently installed and...
$28,500
One used BloApCo Model 3CAXS-3058H shredder powered by a 30 hp, 230/460v, 3 phase electric motor, with infeed conveyor- 62" wide x 78" long with 54" wide...
$18,500
This unit is a Carter Day Model 212 precision sizer powered by a 3/4-hp electric motor. Designed to use two perforated cylinders for sizing granular material.
$6,250
CMI Maxigrind Model 460 G Portable Horizontal Grinder- powered by a CAT 3406- 480hp Turbo charged diesel engine.Includes cab with controls, knukleboom...
$79,000
This complete wire chopping line can process 500-800 lbs. per hour and includes one refurbished 25-hp heavy-duty granulator with one new separation system...
$64,900
This unit is a Eidal Model 62x41 low speed/high torque shredder powered by a 200-hp, 480 volt, three-phase electric motor and comes equipped with a 62"...
$194,500
Eidal Model 72 X 41 slow speed-high torque shredder, equipped with at KYB 525S hydraulic pack with Dension pumps and a powered by two (2) 75 hp, 230/460...
$99,500
Eidal Model 72 X 41 slow-speed high-torque shredder, equipped with a KYB 525S hydraulic pack with Denison pumps and a powered by two (2) 75 hp, 230/460...
$127,500
Eldan Rasper Model 1200-1 shredder. Powered by a 120, 460V, 120 hp 3-phase electric motor, Infeed feed hopper, stand, controls, 12 flying knives, 3 static...
$84,500
EZ Model A+ Portable Car Crusher powered by a John Deer diesel engine, 10" bore cylinders (no leaks0, 4" rod shaft, straight walls, opening is 20' long...
$79,000
Heil 24' long X 8' diameter Triple Pass Rotary Kiln Dryer with a 12' long X 5' diameter (refractory lined) burner with combustion chamber. Includes Maxon...
$118,000
Mac Saturn 62 x 40 slow speed-high torque shredder with one 525 Hydrostar motor powered by two 150-hp, 230/460 volts, 3 phase electric motors. Throat...
$69,750
This hammermill/shredder is powered by a 100 to 250-hp electric motor and comes equipped with a 30" x 40" infeed opening. Hopper and stand to be fabricated...
$65,000
This Miller Pulverizer is powered by a 150-hp, 480 volt, three-phase electric motor. Infeed opening is 19" long x 12" wide. Comes with a 1/2" screen.
$28,000
This Morbark Waste Recycleris powered by a 650-hp Cummins diesel engine and comes equipped with loader with grapple. Cab with controls. Fairly new chipper...
$54,000
This incline conveyor is 6' long x 8" wide and is powered by a 1/2-hp 208-230/460 volt electric motor with a standard speed of 60 FPM. It is equipped...
$1,500
Proto Grind Model 1200 Portable Horizontal Grinder- Powered by a 425-hp Cummins diesel engine with the powerful Rot Drive System: hydraulically driven,...
$78,500
SIERRA Model PN2700 Mobile Baler with Crane, powered by a Cummins Model 4TBA-3-9P 3 cylinder diesel engine. Charging box (open) is 2.700 mm long and 1.500...
$149,000
This surge hopper is approximately 2.5 cubic yards. The bin is 42" wide x 40" long x 72" deep with a 43-1/2" long x 8" wide discharge.
$6,500
This rotary valve is a Model 12 ROTO SEAL S.F. and is powered by a 3/4-hp, 208-230/460-480v electric motor. Openings are 12" x 12", and 12" in diameter.
$4,250
New Tuffman Model 722 Bag Breaker Trommel- 22' long x 7' diameter barrel with 30 12" spears bust evenly located throughout the barrel. Powered by a 10hp,...
$38,500
This unit is a new Tuffman Model 830 stationary trommel screen powered by a 10-hp three-phase electric motor with a 25 to 1 gear reducer. Trommel barrel...
$68,500
This two-deck disc classifier is powered by a 3/4-hp, 208-230/460 volt, three-phase electric motor. Top deck has six shafts and bottom deck has four shafts,...
$7,500
This is a WSM Model 48-6 Disc Screen, powered by a 5 hp 230/460V, 3-phase SM-Cyclo drive motor. It has 8 disc rolls on 11" centers with 6 discs per roll,...
$22,500
Tri-component blender equipped with hopper/loader, controls and single-phase electric motor. Material is loaded into bins on top and fed at a specified...
$4,300