Found 137 Listings
Click on equipment name or thumbnail photo to view details.
Click on equipment name or thumbnail photo to view details.
This is a Tuffman "Mini" 3-man sorting system: 20' long x 32" wide picking table with three 16" x 60" chutes with 52" clearance for gaylords or dumpsters....
$18,350
This is a Tuffman "Mini" 4-man sorting system: 25' long x 32" wide picking table with four 16" x 60" chutes with 52" clearance for gaylords or dumpsters....
$19,850
This is a Tuffman 12-man sorting system. 64' long x 42" wide 12-man picking table with 12 sorting chutes (6 on each side), Tuffman standard infeed conveyor,...
$109,000
This unit is a NEW Tuffman 32' belt over roller heavy-duty incline conveyor powered by a 20 hp 3-phase electric motor with 25 to 1 shaft-mounted gear reduced...
$42,000
This is a NEW Tuffman 6-man sorting system. 34' long x 42" wide 6-man picking table with 6 sorting chutes (3 on each side), two-ply 3/16" x 1/16" 220 PIW...
$69,500
This is a Tuffman 8-man HD-P portable sorting system. 32' long x 42" wide 8-man portable picking table with 8 sorting chutes (4 on each side), infeed hopper...
$57,700
This is a Tuffman 8-man sorting system. 44' long x 42" wide 8-man picking table with 8 sorting chutes (4 on each side), Tuffman standard infeed conveyor,...
$78,500
20' long x 42" wide incline conveyor. 36" wide rough top belting, powered by 2 hp, 230, 3-phase electric motor. Good condition.
$4,800
This unit is a Tuffman Can Densifier powered by a 5 hp, 110 V, single-phase electric motor. Produces 28-30 lb bales in 3-4 minutes. Crushes whole or pre-crushed...
$14,950
This unit is a NEW Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$9,300
This unit is a Tuffman CBS 30" permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$9,800
This unit is a NEW Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$10,400
This unit is a Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with cleats...
$11,800
This unit is a NEW Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$13,500
Tuffman 532ED Extreme Duty Conveyor- Conveyor is 32' long x 5' wide powered by a 20 hp 3-phase electric motor with size 6 shaft mounted gear reducer with...
$78,500
This unit is a NEW Tuffman Model 722 stationary trommel screen powered by a 10 hp, 3-phase electric motor with a 25 to 1 gear reducer. Trommel barrel is...
$44,500
This unit is a Tuffman Model 722-P Portable trommel screen powered by a hydraulic drive motor driven by a diesel engine. Trommel barrel is 22' long x 7'...
$88,000
This 10' long x 16" wide slider bed conveyor is powered by a 1/3 hp, single-phase electric motor and comes equipped with a 12" wide belt.
$950
This 10' long x 16" wide slider bed conveyor is powered by a 1/3 hp, 208-230/460 V, 3-phase electric motor and comes equipped with a 12" wide belt.
$850
This 11' long x 22" wide conveyor is powered by a 1/2 hp, 115/230 V, single-phase electric motor and comes equipped with an 18" wide belt. Good condition....
$2,750
This unit is a 12' long incline conveyor powered by a 3-phase electric motor. 9' long incline portion and 3'-3" long on horizontal section x 36" wide....
$3,850
This 14' long x 20" wide incline case conveyor is powered by a 1 hp, 230/460 V, 3-phase electric drive motor. It is equipped with Jack-Shaft post sections;...
$3,300
14’ Incline Conveyor. 14’ long, 18 ½ “ wide, 16” wide belt. Powered by a ½ hp, 115/230 V, single-phase Century motor.
$2,450
This blower is powered by a 15 hp, 1760 rpm electric motor. It is 24" in diameter with an outlet of 26" x 16" and an inlet of 22" diameter.
$1,750
This blower is powered by a 15 hp, 220/440 V, 1745 rpm, 3-phase General Electric electric motor. The inlet is 16" in diameter with an outlet of 18" x 9",...
$3,700
This auger is 15' long x 13" diameter and is powered by a 1/2 hp electric motor.
$3,500
15' Conveyor - 15' long X 26" wide (belt is 22"). Powered by a 1 hp, 220 V, 3-phase electric motor. Good Condition.
$2,500
15' long x 24" wide incline conveyor with cleated belting. Powered by a 1.5 hp, 240/460 V, 3-phase electric motor. 24" wide heavy-duty belting with 2"...
$5,800
This covered conveyor is 18'-6" long and is powered by a 3 hp, 208-230/460 V, 3-phase electric motor. It is equipped with a 25" belt with 2" cleats on...
$9,800
18' long x 33" wide incline conveyor. Powered by a 2 hp, 208-230/460 V, 3-phase electric motor. 29 1/2" belt. 10" side skirting. Discharge height is 64"....
$3,400
18' long x 33" wide incline conveyor. Powered by a 2 hp, 208-230/460 V, 3-phase electric motor. 4" side skirting. Good condition.
$3,800
18' long x 36" wide incline conveyor with 3" cleats spaced 36" apart. 16" side skirting. Powered by a 2 hp, 208-230/460 V, 3-phase electric motor. Good...
$8,800
This 18' long x 30" wide aluminum frame conveyor was manufactured by HFA (Harvard Factory Automation) in 2004. Powered by a 1/6 hp, 3-phase electric motor. Seamless...
$3,800
18' long x 20" wide x 23" tall stainless steel enclosed conveyor powered by 1-1/2 hp electric motor. Good condition. Applications include: food service,...
$4,900
This auger is 20' long x 8" diameter and is powered by a 1/3 hp electric motor.
$3,200
This auger is 20' long x 6" diameter and is powered by a 1/2 hp electric motor.
$3,250
20' long x 30" wide incline conveyor with 3-ply, heavy-duty belting. Comes equipped with legged head pulley and tail pulley, hydraulic power, feed hopper....
$6,800
20' x 36" Rotary kiln mount on a dual axle trailer.Include burner with blower.Infeed hopper, controls.Excellent for drying soil, sands salt, gravel/rocks,...
$59,500
This unit is a 20x80 Eriez stainless steel conveyor with vibrating chute, powered by a 1/2-hp, 208-230/480V three-phase Leeson gear motor with Warner brake....
$4,800
This 21' long x 42" wide conveyor is powered by a 2-hp, 208-230/460 volt, three-phase electric motor. It is equipped with a 37-1/2" wide rough-top belt,...
$9,250
Barber Green Rotary Kiln with dryer; 24' long X 7' diameter rotary kiln with refractory brick lining and flightings, drive mechanism with trunions and...
$68,000
24' long x 66" diameter rotary kiln with steel flighting and 36" disc cone deflector. Large infeed is 52" opening and discharge is 9" x 9". 2 Allis Chalmers...
$84,000
Lewco 27' Incline Conveyor - 7' long x 36" wide horizontal feed conveyor onto a 19' 7" long x 36" wide (belt 32") incline conveyor (adjustable discharge...
$9,800
Lewco 29' Incline conveyor - 8' long x 33" wide horizontal feed conveyor onto a 20' 6" long x 38" wide incline conveyor. Incline conveyor powered by a...
$12,800
This is a large lot (1000' available) of 3" galvanized steel (ID) water pipe with saddle-joint (non-threaded) ends. Majority of pipe is in 21' long sticks...
$3,800
This blower is powered by a 40-hp, 240/460v three-phase electric motor. Side outlet is 18-1/2" diameter, top outlet is 16-1/4" diameter. Fan blades are...
$3,450
Rotary Drum Drying Tunnel with Heat Chamber - 40' long x 7' diameter rotary klin with gas fired heat chamber. Klin is 40' long x 7' diameter with internal...
$114,500
This 5' long x 24" wide EMI Corp. Conveyor is powered by a 1/2-hp three-phase electric motor.
$2,250
63' Portable Incline Conveyor- 63' long x 24" wide incline conveyor with 18" Chevron belting. Powered by a Wisconsin 4-cylinder engine and mounted on a...
$9,800
This screw auger is 7' long x 10" diameter, is powered by a 1-hp electric motor, and comes equipped with an infeed spout.
$3,400
This unit is a 70' Indirect Fire Municipal Solid Waste (MSW) Dryer with Vapor Recovery Unit that includes one 70' cor-ten rotary dryer, combustion chamber...
$2,350,000
This screw auger is 8' long x 10" diameter, is powered by a 1-hp electric motor, and comes equipped with an infeed spout.
$3,400
Matthews 8' long x 20" wide incline conveyor with 3" side rails, powered by a 1/2-hp, 220/480 volt, three-phase electric motor. Like new - never been used!...
$2,750
This unit is an American Air Filter (AAF) - Arrestall baghouse/dust collector, self-contained dust arrester. 3200 CFM. Complete system with fans, motors...
$6,800
AAF Fabri-Pulse Model 4-420-1000 Dust Collector. Design M. Construction materials - 12 gauge, H.R.S. ASTM-A570 steel, 420 - 4' bags with a combined surface...
$8,800
AAF Fabri-Pulse Model 4-420-1000 Dust Collector. Design M. Construction materials - 12 gauge, H.R.S. ASTM-A570 steel, 420 - 4' bags with a combined surface...
$8,800
Alfa Laval Model NX418B-11G stainless steel three-phase solid bowl decanter centrifuge. Rated at 150 gallons per minute. Three phase to allow speratation...
$124,000
This 12' long x 16" wide Alvey belt conveyor is powered by a 1/2-hp three-phase electric motor. Comes with controls. Good condition.
$2,300
This unit is an Astec Model 90-101 Portable Thermal Treatment Plant including: (1) portable feed system with 8'x12' hopper with feed belt, scalper and...
$728,000
This bagging system is equipped with a Goodman Conveyor bucket elevator, type: centrifugal, centers (ft): 25.69, speed: 235, TPH: 5.1 at 45 rpm (235 fpm);...
$27,500
Barber-Greene Model 750 Portable Twin Shaft Pugmill. Powered by a 100hp, 460 v, 3 phase electric motor, twin shaft, 12'x36" wide discharge conveyor, mounted...
$38,500
This skid-mounted pump is powered by a 10-hp, 1765 rpm, 208-230/460 volt, three-phase electric motor with a Dodge DR 200A speed reducer. Capacity of 150...
$14,500
Broce Model RJ350 8' Broom Sweeper powered by a John Deere 404DF150B Engine; 4 cylinder engine, NEW 8' wide broom, controls, good tires, only 3000 hours.
$12,800
This can flattener's crushing mechanism is powered by a 7.5-hp, 230/460 volt, three-phase electric motors. The Chicago blower is powered by a 10-hp, 230/460...
$7,900
This unit is a Carter Day Model 212 precision sizer powered by a 3/4-hp electric motor. Designed to use two perforated cylinders for sizing granular material.
$6,250
This blower is powered by a 20-hp, 208-230/460v three-phase electric motor. The side outlet is 14" diameter, top outlet is 13-1/2" wide x 18" long. Fan...
$3,250
This Cincinatti fan is powered by a 30-hp, 208-230/460 volt, 78-72/36 amps, three-phase electric motor.
$3,800
This used conveyor drive unit is powered by a 2-hp three-phase electric motor. It has a 19" wide x 12" diameter head pulley and a shaft-mounted Dodge...
$1,250
This Corwell Model 262-BLO Blower is powered by a 20 hp, 230/460 volts,1755 rpm 51.0/25.5 amps electic motors with on-off switch. Good Condition.
$1,950
This unit is a CP Manufacturing Model CD300 can densifier with a 500 to 1000 lbs. per hour capacity, 18 lb biscuit, 40-cubic-foot allowing 140,000 lbs....
$12,500
The ECO Flock 1000 System consists of a three, steel roller, distribution system. There are two flocking sieves and four collecting drawers for flocking...
$19,750
WWR Model 9136 (36" Unit with 16" support legs) ECS Rare Earth Two Pulley Eddy Current Separator, Rare Earth 7" diameter rotor encased within an extra...
$96,500
Compactor with 60" X 26" hydraulic RAM.Feed opening is 42" X 42". Chamber opening is 61" X 36". Needs power pack. Make Offer!
$1,500
Flex Kleen Model 84CT38 Baghouse - 38 bag capacity baghouse. 14" diameter on the inlet and 10" diameter on the outlet. 13' long and 5' in diameter. Good...
$13,500
Operating Data:Volume: 2600 acfm; Cloth Area: 602 sq ft; Ratio: 4.32/1; Dust: Desert Sand; Dust Size: 1800 microns; Dust Density: lbs/cu ft; Dust Loading:...
$55,000
This is a Forsberg Model 200V Vacuum Gravity Separator, that is powered by a 1 hp electric drive motor, and 1/2hp electric motor for the vacuuum or suction....
$15,800
This vacuum separator assures a complete and accurate product density classification from the very lightest to the very heaviest.Easily adjustable divider...
$22,000
This screen is 60" x 84" with a 5-hp motor. Adjustable feed hopper assures consistent supply of product onto screen.the unit is a positive eccentric, high...
$46,000
This destoner separates dry material into specific weight fractions by a high speed eccentric deck motion and air being drawn through a presized screen.It...
$15,000
This Granite Environmental Model SS-48 oil drum skimmer with drum head is powered by a hydraulic-driven Von Ruden motor with a 1-hp Delta power hydraulic...
$29,500
Green Heck Model SWB-22S Blower, powered by 1/2 hp, 208 - 230/460 volts Electric motors, On-off switch, Good Condition.
$1,650
This unit is powered by a 15-hp, 230/460 volt, 1765 rpm electric motor. It has a 12" x 12" feed opening, 1" screen, and stainless steel housing.
$7,500
This unit is a Hardinge rotary cooler or dryer, horizontal, mild carbon steel, 10' diameter x 100' long. Falk enclosed gear drive, Model 35C2-02A8, 75-hp,...
$125,000
This heavy-duty rotary air lock valve/feeder has an inside diameter of 17-1/2" and an outside diameter of 25". It is powered by a chain-driven electric...
$11,700
Heil 24' long X 8' diameter Triple Pass Rotary Kiln Dryer with a 12' long X 5' diameter (refractory lined) burner with combustion chamber. Includes Maxon...
$118,000
This unit is a Hyster Model H80C 8000-lb side-shift forklift with an 8' mast that will lift 16' high, 46" forks, dually-pneumatic tires. Good condition.
$9,800
Industrial Air Products (IAP) 40 HP Blower powered by a Balador 40 HP, 460 V, 50 amp, three-phase electric motor. Stand assembly. Good condition.
$7,800
JRB Model WA120 60" adjustable-width forks, S/C 0896-21806-1. Maximum outside width - 60", minimum outside width - 28", fork width - 6", fork length -...
$4,800
This Lundell 850 Densifier/Pelletizer is powered by a 150-hp electric motor (460 volts, 3-phase), multiple power band belt. height is 86" x 75" width...
$88,500
This unit is a Material Master 5353-AF bulk bagging system that comes equipped with a Salina Vortex Quantum Model GRA10-F-S4 orifice gate vale and a Rice...
$14,500
Mayfran 35' long x 36" steel belted conveyors with 2" steel cleats spaced every foot.11' horizontal x 22' incline x 3' discharge horizontal x 12' discharge...
$29,500
This Posibin dump hopper is a combination 750-cubic-foot bin with an 8' diameter bin activator. Carbon steel construction. It is equipped with a 3-hp...
$12,500
This MicroAir Clean Air Systems dust collector is powered by a 30-hp, 208-230/460 volt, 74-68/34 amp, three-phase electric motor. Â Typically 5,000-10,000...
$7,800
This skid-mounted pump is powered by a 75-hp, 1765 rpm, 230/460 volt, three-phase electric motor. 13" open impeller, size 4x3x13, with explosion-proof...
$19,800
Mosley Model RS 2500 Can Densifier powered by 15 hp, 230/460 volt, 3 phase electric motor, infeed conveyor with hopper controls. Will make a 14" x 10.5"...
$12,500
This incline conveyor is 6' long x 8" wide and is powered by a 1/2-hp 208-230/460 volt electric motor with a standard speed of 60 FPM. It is equipped...
$1,500
This Novatec Model VPU-15 vacuum power unit is powered by a 15-hp electric motor and comes equipped with a Universal RAI blower and cyclone. 3" O.D. inlet...
$6,750
This oil/water separator tank is one large 54" fiberglass cylinder with 20" funnel cone, stand-mounted with lid. 74" across = 1130 U.S. gallons. Made by...
$3,850
This oil/water separator tank is one small 52" fiberglass cylinder with 10" funnel cone, stand-mounted with NO lid. 18" across = 61 U.S. gallons. Made...
$1,970
This oil/water separator tank is one large 6' tall fiberglass cylinder with NO lid. 6' across = 1322 U.S. gallons. Made by EFI Edwards Fiberglass, Inc.
$3,100
This oil/water separator tank is one medium 48" fiberglass cylinder with 18" funnel cone, stand-mounted with lid. 36" across = 238 U.S. gallons. Made by...
$2,300
This 13-1/2' long x 26" wide paddle conveyor is powered by a 10-hp electric motor and is in good condition.
$3,970
Pettibone Model 25 Rough Terrain Crane powered by Detroit Model 453 diesel engine. 50' boom, 25,000 lbs, 3896 hours, 50% rubber on tires. Good working...
$22,500
Powerscreen Mark II conveyor 27' 8" long x 26" wide incline conveyor with 13' to 16' discharge height. 18" belt with side skirting. Feed hopper. Hydraulic...
$14,500
Powerscreen Model Mark II 44' long x 35" wide incline conveyor with 13' to 16' discharge height. 24" belt with side skirting. Feed hopper. Hydraulic power...
$16,500
This unit is a Prodeva Model 250 can and glass crusher powered by a 5-hp, 230/460 volt, three-phase electric motor. In-feed hopper, controls. Crushes glass...
$6,700
This is a multifunctional stainless steel 308 vessel that is currently ready for our engineers to cost effectively configure it to fit your application...
$98,500
Rare Earth Drum Magnet 40" wide x 31" diameter. Electric Motor, 3 phase, 3 hp, Good condition.
$8,750
This unit is a 30' long x 6' diameter (OD) refractory lined Entyre portable rotary kiln with 42" X 42" refractory lined feed hopper.Includes a 9 MMBTU/hr...
$118,500
This unit is powered by a 40-hp Kubota V2203 diesel engine. Windrows up to 12' wide x 5' high in a two-pass operation. 6' wide x 7' high elevating face,...
$65,000
This unit is powered by a 95-hp Cat diesel engine. 9' x 7' elevating face. Remote controls allow for operation from cab. Material Handling, Tub Grinders, Waste...
$85,000
This unit is a Scat Model 4932 compost turner powered by a 140-hp Cat diesel engine with a 10' x 10' elevating face. Material Handling, Tub Grinders, Waste...
$55,000
ThisShar Systems Model DSCGK-50TNLFZ single-shaft mixer is powered by a 5-hp 230/460V electric motor and has a 1/4-cubic-yard capacity. It was used to...
$3,750
This unit is a Skako Model 50E vibrating table powered by a 300 volt, single-phase electric motor. Vibrating table is 60" x 60", 38" x 45" inside the trough...
$3,500
This 10'-6" long x 12" wide slider bed conveyor is powered by a 1/3-hp, 115 volt, single-phase electric motor and comes equipped with a 10" wide belt.
$900
This unit is a SludgeMaster Model 4x12C-P hydraulic-driven piston pump powered by a 55-hp Isuzu diesel hydraulic power unit. The power unit is designed...
$28,500
This unit is a SludgeMaster Model 4x12C-P hydraulic-driven piston pump powered by a 30-hp, 240/480 volt, three-phase explosion-proof electric motor. It...
$32,500
This unit is a Stearns 30" DC lifting scrap magnet - 230 V.D.C., 15.5 amps. Harness and chains included. Good condition.
$7,800
This surge hopper is approximately 2.5 cubic yards. The bin is 42" wide x 40" long x 72" deep with a 43-1/2" long x 8" wide discharge.
$6,500
This rotary valve is a Model 12 ROTO SEAL S.F. and is powered by a 3/4-hp, 208-230/460-480v electric motor. Openings are 12" x 12", and 12" in diameter.
$4,250
This conveyor is powered by a 1.5-hp 230/460 volt electric motor. It is equipped with three 7"-wide conveyor belts. One belt is 11' long and two are 15'-9"...
$5,600
Hydraulic drive hook/chain in-feed system. Can be mounted stationary or portable. Variable feed rates from 100-1000 tires per hour. "Like new" condition...
$5,500
New Tuffman Model 722 Bag Breaker Trommel- 22' long x 7' diameter barrel with 30 12" spears bust evenly located throughout the barrel. Powered by a 10hp,...
$38,500
This unit is a new Tuffman Model 830 stationary trommel screen powered by a 10-hp three-phase electric motor with a 25 to 1 gear reducer. Trommel barrel...
$68,500
This two-deck disc classifier is powered by a 3/4-hp, 208-230/460 volt, three-phase electric motor. Top deck has six shafts and bottom deck has four shafts,...
$7,500
This Vermeer TG400 tub grinder screen has 6" round holes. One unit available.
$950
This Vermeer TG400 tub grinder screen has 5" diamond holes. Two units available.
$1,050
This rubber-sidewall incline conveyor is 6' long x 8" wide with the sidewalls, 5" wide without the sidewalls. It is powered by a .33-hp single-phase electric...
$2,700
This 22' long x 48" wide heavy duty vibratory conveyor is powered by a 25-hp electric motor.The stand footprint is 15'9" long x 6'2" wide x 6'3" tall....
$19,750
This split-case, horizontal-mounted pump is a Model 4L1W-100-P26G-D powered by a 10-hp, 230/460 volts, 1170 rpm, three-phase electric motor. It comes...
$20,000
This is a WSM Model 48-6 Disc Screen, powered by a 5 hp 230/460V, 3-phase SM-Cyclo drive motor. It has 8 disc rolls on 11" centers with 6 discs per roll,...
$22,500
This unit is 6' x 22' long, with a 15' lump breaker, 6' screen, powered by 15-hp motor and dual shaft mount drive. Processes 10 TPH.
$44,000
Tri-component blender equipped with hopper/loader, controls and single-phase electric motor. Material is loaded into bins on top and fed at a specified...
$4,300
This unit is in great condition with no repairs needed! Powered by anew John Deere diesel engine with less than 50 hours. This unit can be used for all...
$47,500
This unit is in good condition and is powered by a John Deere dieselengine. Less than 50 hours on new engine, newcontrols. Material Handling, Tub Grinders, Waste...
$44,000
This unit is in excellent shape, no repairs needed! Powered by a250-hp Cat 3208 diesel engine. Low hours,used for turning yard waste compost. Can be...
$60,000
Wurtex 9' x 5' Disc Screen- 9' long x 5' wide, Screen deck with 5 disc rollers on 11" centers, SEW 1.5 Kw drive on each Disc roll, 277/480V, 3-phase, 60Hz....
$18,000