Found 106 Listings
Click on equipment name or thumbnail photo to view details.
Click on equipment name or thumbnail photo to view details.
This is a Tuffman 12-man sorting system. 64' long x 42" wide 12-man picking table with 12 sorting chutes (6 on each side), Tuffman standard infeed conveyor,...
$109,000
This unit is a NEW Tuffman 32' belt over roller heavy-duty incline conveyor powered by a 20 hp 3-phase electric motor with 25 to 1 shaft-mounted gear reduced...
$42,000
This is a NEW Tuffman 6-man sorting system. 34' long x 42" wide 6-man picking table with 6 sorting chutes (3 on each side), two-ply 3/16" x 1/16" 220 PIW...
$69,500
This is a Tuffman 8-man HD-P portable sorting system. 32' long x 42" wide 8-man portable picking table with 8 sorting chutes (4 on each side), infeed hopper...
$57,700
This is a Tuffman 8-man sorting system. 44' long x 42" wide 8-man picking table with 8 sorting chutes (4 on each side), Tuffman standard infeed conveyor,...
$78,500
20' long x 42" wide incline conveyor. 36" wide rough top belting, powered by 2 hp, 230, 3-phase electric motor. Good condition.
$4,800
This unit is a Tuffman Can Densifier powered by a 5 hp, 110 V, single-phase electric motor. Produces 28-30 lb bales in 3-4 minutes. Crushes whole or pre-crushed...
$14,950
This unit is a NEW Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$9,300
This unit is a Tuffman CBS 30" permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$9,800
This unit is a NEW Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$10,400
This unit is a Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with cleats...
$11,800
This unit is a NEW Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$13,500
This 10' long x 16" wide slider bed conveyor is powered by a 1/3 hp, single-phase electric motor and comes equipped with a 12" wide belt.
$950
This 10' long x 16" wide slider bed conveyor is powered by a 1/3 hp, 208-230/460 V, 3-phase electric motor and comes equipped with a 12" wide belt.
$850
This is a General Electric Custom 8000 induction motor. 100 hp, 1180 rpm, 550 V, 60 hz, 8143 frame and 98 full load amps.
$1,500
This 11' long x 22" wide conveyor is powered by a 1/2 hp, 115/230 V, single-phase electric motor and comes equipped with an 18" wide belt. Good condition....
$2,750
This unit is a 12' long incline conveyor powered by a 3-phase electric motor. 9' long incline portion and 3'-3" long on horizontal section x 36" wide....
$3,850
This 14' long x 20" wide incline case conveyor is powered by a 1 hp, 230/460 V, 3-phase electric drive motor. It is equipped with Jack-Shaft post sections;...
$3,300
14’ Incline Conveyor. 14’ long, 18 ½ “ wide, 16” wide belt. Powered by a ½ hp, 115/230 V, single-phase Century motor.
$2,450
This blower is powered by a 15 hp, 1760 rpm electric motor. It is 24" in diameter with an outlet of 26" x 16" and an inlet of 22" diameter.
$1,750
This blower is powered by a 15 hp, 220/440 V, 1745 rpm, 3-phase General Electric electric motor. The inlet is 16" in diameter with an outlet of 18" x 9",...
$3,700
This auger is 15' long x 13" diameter and is powered by a 1/2 hp electric motor.
$3,500
15' long x 24" wide incline conveyor with cleated belting. Powered by a 1.5 hp, 240/460 V, 3-phase electric motor. 24" wide heavy-duty belting with 2"...
$5,800
This is an Ajax Electric Motor Corp. Model AE-150-1200 continuous-duty electric motor, 150 hp, 230/460 volts, 1185 rpm.
$1,800
This covered conveyor is 18'-6" long and is powered by a 3 hp, 208-230/460 V, 3-phase electric motor. It is equipped with a 25" belt with 2" cleats on...
$9,800
18' long x 33" wide incline conveyor. Powered by a 2 hp, 208-230/460 V, 3-phase electric motor. 29 1/2" belt. 10" side skirting. Discharge height is 64"....
$3,400
18' long x 33" wide incline conveyor. Powered by a 2 hp, 208-230/460 V, 3-phase electric motor. 4" side skirting. Good condition.
$3,800
18' long x 36" wide incline conveyor with 3" cleats spaced 36" apart. 16" side skirting. Powered by a 2 hp, 208-230/460 V, 3-phase electric motor. Good...
$8,800
This auger is 20' long x 8" diameter and is powered by a 1/3 hp electric motor.
$3,200
This auger is 20' long x 6" diameter and is powered by a 1/2 hp electric motor.
$3,250
This unit is a 20x80 Eriez stainless steel conveyor with vibrating chute, powered by a 1/2-hp, 208-230/480V three-phase Leeson gear motor with Warner brake....
$4,800
This 21' long x 42" wide conveyor is powered by a 2-hp, 208-230/460 volt, three-phase electric motor. It is equipped with a 37-1/2" wide rough-top belt,...
$9,250
This SEW Eurodrive continuous-duty motor is C-faced, 25-hp, 230/460 volts, 1752 rpm, type RF102DV180M.
$750
This is an SM-Cyclo continuous-duty motor:Â C-faced, 25-hp, 230/460 volts, 60 hz, 1770 rpm, frame G180M.
$750
This is a large lot (1000' available) of 3" galvanized steel (ID) water pipe with saddle-joint (non-threaded) ends. Majority of pipe is in 21' long sticks...
$3,800
This blower is powered by a 40-hp, 240/460v three-phase electric motor. Side outlet is 18-1/2" diameter, top outlet is 16-1/4" diameter. Fan blades are...
$3,450
This 5' long x 24" wide EMI Corp. Conveyor is powered by a 1/2-hp three-phase electric motor.
$2,250
Wood-fired steam generating power plant complete with all buildings, one 600-hp 300-lb. rated hybrid boiler (water-tube with fire-tube). System has auto...
$295,000
This screw auger is 7' long x 10" diameter, is powered by a 1-hp electric motor, and comes equipped with an infeed spout.
$3,400
This unit is a 70' Indirect Fire Municipal Solid Waste (MSW) Dryer with Vapor Recovery Unit that includes one 70' cor-ten rotary dryer, combustion chamber...
$2,350,000
This screw auger is 8' long x 10" diameter, is powered by a 1-hp electric motor, and comes equipped with an infeed spout.
$3,400
Matthews 8' long x 20" wide incline conveyor with 3" side rails, powered by a 1/2-hp, 220/480 volt, three-phase electric motor. Like new - never been used!...
$2,750
This unit is an American Air Filter (AAF) - Arrestall baghouse/dust collector, self-contained dust arrester. 3200 CFM. Complete system with fans, motors...
$6,800
This air-cooled exchanger is powered by a 10-hp, 1800 rpm, 230/400/460 volt electric motor. MAWP 100 PSI @ 35 (degrees F). Temperature in - 220 (degrees...
$12,800
These are brand new knives for Alsteele Model 1018, 1218, or 1119 granulators. Includes two fly knives and two bed knives - 17.985" long. The fly knives...
$400
This 12' long x 16" wide Alvey belt conveyor is powered by a 1/2-hp three-phase electric motor. Comes with controls. Good condition.
$2,300
This skid-mounted pump is powered by a 10-hp, 1765 rpm, 208-230/460 volt, three-phase electric motor with a Dodge DR 200A speed reducer. Capacity of 150...
$14,500
Blower Application Model 25-4 Blower, powered by 15 hp, 208-230/460 volts, 1765 rpm,42.2-39.2/19.6 amps, electric motors, on-off switch. Good Condition.
$1,950
Broce Model RJ350 8' Broom Sweeper powered by a John Deere 404DF150B Engine; 4 cylinder engine, NEW 8' wide broom, controls, good tires, only 3000 hours.
$12,800
The blower is a General Combustion Model FP-86-O powered by a 50-hp, 230/460 volt, three-phase electric motor. It is also equipped with a Combotronic ignition...
$22,700
This can flattener's crushing mechanism is powered by a 7.5-hp, 230/460 volt, three-phase electric motors. The Chicago blower is powered by a 10-hp, 230/460...
$7,900
Carpco AFS-1010 system is designed to separate plastics from metal that are stockpiled or land filled. The principle utilized in this process is commonly...
$450,000
This CECO fiber bed mist collector is a Model DLM and is approximately 42" diameter, 205" high, and is constructed with stainless steel. It is also equipped...
$15,000
This CECO fiber bed mist collector is approximately 28" diameter, 100" high, and is constructed from carbon steel. It is also equipped with explosion-proof...
$13,500
This blower is powered by a 20-hp, 208-230/460v three-phase electric motor. The side outlet is 14" diameter, top outlet is 13-1/2" wide x 18" long. Fan...
$3,250
This Cincinatti fan is powered by a 30-hp, 208-230/460 volt, 78-72/36 amps, three-phase electric motor.
$3,800
This complete wire chopping line can process 500-800 lbs. per hour and includes one refurbished 25-hp heavy-duty granulator with one new separation system...
$87,500
This used conveyor drive unit is powered by a 2-hp three-phase electric motor. It has a 19" wide x 12" diameter head pulley and a shaft-mounted Dodge...
$1,250
This Corwell Model 262-BLO Blower is powered by a 20 hp, 230/460 volts,1755 rpm 51.0/25.5 amps electic motors with on-off switch. Good Condition.
$1,950
This unit is a Cotto Model GR200-5 single-speed transmission, SN 168814. The tag shows a stamp of GR975200. This transmission was taken out of a Morbark...
$6,800
Custom Equipment Hybrid 1030 Lift - lifts 750 pounds. Side-out deck extension, with slip-resistant surface, non-marking tires, working height 10', controls,...
$5,900
Custom Equipment Hybrid 1030 Lift - lifts 750 pounds. Side-out deck extension, with slip-resistant surface, non-marking tires, working height 10', controls,...
$5,900
This batch mixer is powered by a 25 hp, three phase electric motor.The tank is 8\' x 4\" long x 4\' 3\" wide with a mixing capacity of 115 cubic feet or...
$14,500
The ECO Flock 1000 System consists of a three, steel roller, distribution system. There are two flocking sieves and four collecting drawers for flocking...
$19,750
This 10' filter press is equipped with 24" plates. There are 45 plates.
$15,000
This is a Forsberg Model 200V Vacuum Gravity Separator, that is powered by a 1 hp electric drive motor, and 1/2hp electric motor for the vacuuum or suction....
$15,800
Galland Henning 30DC Dual Compression Baler/Briquetter.Powered by a 50 hp 480 v/3 phase electric motor, dual compression configuration offered in two-ram...
$109,000
This Granite Environmental Model SS-48 oil drum skimmer with drum head is powered by a hydraulic-driven Von Ruden motor with a 1-hp Delta power hydraulic...
$29,500
Green Heck Model SWB-22S Blower, powered by 1/2 hp, 208 - 230/460 volts Electric motors, On-off switch, Good Condition.
$1,650
This unit is powered by a 15-hp, 230/460 volt, 1765 rpm electric motor. It has a 12" x 12" feed opening, 1" screen, and stainless steel housing.
$7,500
This HAMM Raco R350 is a soil stabilizer with hydro statically driven milling and mixing rotor.Powered by a 490 HP Deutz diesel water cooled engine, 8...
$165,000
HIGH FIRE:
Max Input @ 10% Excess Air (Btu/Hr): 660,000; Max Air Flow @ 16 osig (scfh): 6,820; Min. Input @ Max. Air Flow (Btu/hr) 144,800; Max Excess...
$1,685
This lot of Haybuster IG 11 spare parts includes 40 - sets of 2 and 1 single hammers, 22- shafts, 6 - screens with 4 inch holes, 2 - screens with 2 inch...
$4,800
This heavy-duty rotary air lock valve/feeder has an inside diameter of 17-1/2" and an outside diameter of 25". It is powered by a chain-driven electric...
$11,700
Heil 24' long X 8' diameter Triple Pass Rotary Kiln Dryer with a 12' long X 5' diameter (refractory lined) burner with combustion chamber. Includes Maxon...
$118,000
This unit is a Hyster Model H80C 8000-lb side-shift forklift with an 8' mast that will lift 16' high, 46" forks, dually-pneumatic tires. Good condition.
$9,800
These are the major components of a Mac Saturn 52x40 slow-speed/high-torque shredder. It includes a 52"x46" shredder cutting chamber. There are four...
$4,800
This unit is a Material Master 5353-AF bulk bagging system that comes equipped with a Salina Vortex Quantum Model GRA10-F-S4 orifice gate vale and a Rice...
$14,500
Mayfran 35' long x 36" steel belted conveyors with 2" steel cleats spaced every foot.11' horizontal x 22' incline x 3' discharge horizontal x 12' discharge...
$29,500
This Posibin dump hopper is a combination 750-cubic-foot bin with an 8' diameter bin activator. Carbon steel construction. It is equipped with a 3-hp...
$12,500
This MicroAir Clean Air Systems dust collector is powered by a 30-hp, 208-230/460 volt, 74-68/34 amp, three-phase electric motor. Â Typically 5,000-10,000...
$7,800
This skid-mounted pump is powered by a 75-hp, 1765 rpm, 230/460 volt, three-phase electric motor. 13" open impeller, size 4x3x13, with explosion-proof...
$19,800
This incline conveyor is 6' long x 8" wide and is powered by a 1/2-hp 208-230/460 volt electric motor with a standard speed of 60 FPM. It is equipped...
$1,500
This Novatec Model VPU-15 vacuum power unit is powered by a 15-hp electric motor and comes equipped with a Universal RAI blower and cyclone. 3" O.D. inlet...
$6,750
This oil/water separator tank is one large 54" fiberglass cylinder with 20" funnel cone, stand-mounted with lid. 74" across = 1130 U.S. gallons. Made by...
$3,850
This oil/water separator tank is one small 52" fiberglass cylinder with 10" funnel cone, stand-mounted with NO lid. 18" across = 61 U.S. gallons. Made...
$1,970
This oil/water separator tank is one large 6' tall fiberglass cylinder with NO lid. 6' across = 1322 U.S. gallons. Made by EFI Edwards Fiberglass, Inc.
$3,100
This oil/water separator tank is one medium 48" fiberglass cylinder with 18" funnel cone, stand-mounted with lid. 36" across = 238 U.S. gallons. Made by...
$2,300
This 13-1/2' long x 26" wide paddle conveyor is powered by a 10-hp electric motor and is in good condition.
$3,970
Powerscreen Mark II conveyor 27' 8" long x 26" wide incline conveyor with 13' to 16' discharge height. 18" belt with side skirting. Feed hopper. Hydraulic...
$14,500
Powerscreen Model Mark II 44' long x 35" wide incline conveyor with 13' to 16' discharge height. 24" belt with side skirting. Feed hopper. Hydraulic power...
$16,500
This unit is a Prodeva Model 250 can and glass crusher powered by a 5-hp, 230/460 volt, three-phase electric motor. In-feed hopper, controls. Crushes glass...
$6,700
ThisShar Systems Model DSCGK-50TNLFZ single-shaft mixer is powered by a 5-hp 230/460V electric motor and has a 1/4-cubic-yard capacity. It was used to...
$3,750
This keyed shaft is 7' 1" long for a Shred Pax AZ 80 shredder with a cutting chamber of 32" x 62".It is 4.5" in diameter with 60" hexagon section.
$3,850
This unit is a Skako Model 50E vibrating table powered by a 300 volt, single-phase electric motor. Vibrating table is 60" x 60", 38" x 45" inside the trough...
$3,500
This 10'-6" long x 12" wide slider bed conveyor is powered by a 1/3-hp, 115 volt, single-phase electric motor and comes equipped with a 10" wide belt.
$900
This unit is a SludgeMaster Model 4x12C-P hydraulic-driven piston pump powered by a 55-hp Isuzu diesel hydraulic power unit. The power unit is designed...
$28,500
This unit is a SludgeMaster Model 4x12C-P hydraulic-driven piston pump powered by a 30-hp, 240/480 volt, three-phase explosion-proof electric motor. It...
$32,500
This unit is a Stearns 30" DC lifting scrap magnet - 230 V.D.C., 15.5 amps. Harness and chains included. Good condition.
$7,800
This surge hopper is approximately 2.5 cubic yards. The bin is 42" wide x 40" long x 72" deep with a 43-1/2" long x 8" wide discharge.
$6,500
This rotary valve is a Model 12 ROTO SEAL S.F. and is powered by a 3/4-hp, 208-230/460-480v electric motor. Openings are 12" x 12", and 12" in diameter.
$4,250
This conveyor is powered by a 1.5-hp 230/460 volt electric motor. It is equipped with three 7"-wide conveyor belts. One belt is 11' long and two are 15'-9"...
$5,600
This heat exchanger is a Model UFX-26-5-HP-44, serial number SC17152, and has a surface area of 137 square feet. Plate material is 304SS, 0.5mm thick,...
$6,500
This rubber-sidewall incline conveyor is 6' long x 8" wide with the sidewalls, 5" wide without the sidewalls. It is powered by a .33-hp single-phase electric...
$2,700
This split-case, horizontal-mounted pump is a Model 4L1W-100-P26G-D powered by a 10-hp, 230/460 volts, 1170 rpm, three-phase electric motor. It comes...
$20,000
Tri-component blender equipped with hopper/loader, controls and single-phase electric motor. Material is loaded into bins on top and fed at a specified...
$4,300