 | Tuffman 12-Man Stationary Sorting Station This is a Tuffman 12-man sorting system. 64' long x 42" wide 12-man picking table with 12 sorting chutes (6 on each side), Tuffman standard inf... | $109,000 |
 | Tuffman 32' Heavy-Duty Incline Conveyor This unit is a NEW Tuffman 32' belt over roller heavy-duty incline conveyor powered by a 20 hp 3-phase electric motor with 25 to 1 shaft-mounted gear... | $42,000 |
 | Tuffman 6-Man Stationary Sorting Station This is a NEW Tuffman 6-man sorting system. 34' long x 42" wide 6-man picking table with 6 sorting chutes (3 on each side), two-ply 3/16"... | $69,500 |
 | Tuffman 8-Man HD-P This is a Tuffman 8-man HD-P portable sorting system. 32' long x 42" wide 8-man portable picking table with 8 sorting chutes (4 on each side), ... | $57,700 |
 | Tuffman 8-Man Stationary Sorting Station This is a Tuffman 8-man sorting system. 44' long x 42" wide 8-man picking table with 8 sorting chutes (4 on each side), Tuffman standard infeed... | $78,500 |
 | 20' Incline Conveyor 20' long x 42" wide incline conveyor. 36" wide rough top belting, powered by 2 hp, 230, 3-phase electric motor. Good condition.... | $4,800 |
 | Tuffman CBS 24 Crossbelt Magnet This unit is a NEW Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber wi... | $9,300 |
 | Tuffman CBS 30 Crossbelt Magnet This unit is a Tuffman CBS 30" permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rub... | $9,800 |
 | Tuffman CBS 36 Crossbelt Magnet This unit is a NEW Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber wi... | $10,400 |
 | Tuffman CBS 48 Crossbelt Magnet This unit is a Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with c... | $11,800 |
 | Tuffman CBS 60 Crossbelt Magnet This unit is a NEW Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber wi... | $13,500 |
 | 10' Slider Bed Conveyor This 10' long x 16" wide slider bed conveyor is powered by a 1/3 hp, single-phase electric motor and comes equipped with a 12" wide belt.... | $950 |
 | 10' Slider Bed Conveyor This 10' long x 16" wide slider bed conveyor is powered by a 1/3 hp, 208-230/460 V, 3-phase electric motor and comes equipped with a 12" ... | $850 |
 | 100 hp Electric Motor This is a General Electric Custom 8000 induction motor. 100 hp, 1180 rpm, 550 V, 60 hz, 8143 frame and 98 full load amps.... | $1,500 |
 | 11' Hytrol Conveyor This 11' long x 22" wide conveyor is powered by a 1/2 hp, 115/230 V, single-phase electric motor and comes equipped with an 18" wide belt... | $2,750 |
 | 12' Incline Conveyor This unit is a 12' long incline conveyor powered by a 3-phase electric motor. 9' long incline portion and 3'-3" long on horizontal section x ... | $3,850 |
 | 14' Incline Case Conveyor (with pivoting incline sections) This 14' long x 20" wide incline case conveyor is powered by a 1 hp, 230/460 V, 3-phase electric drive motor. It is equipped with Jack-Shaft po... | $3,300 |
 | 14' Incline Conveyor 14’ Incline Conveyor. 14’ long, 18 ½ “ wide, 16” wide belt. Powered by a ½ hp, 115/230 V, single-phase Century motor.... | $2,450 |
 | 15-hp Blower This blower is powered by a 15 hp, 1760 rpm electric motor. It is 24" in diameter with an outlet of 26" x 16" and an inlet of 22&qu... | $1,750 |
 | 15-hp Blower This blower is powered by a 15 hp, 220/440 V, 1745 rpm, 3-phase General Electric electric motor. The inlet is 16" in diameter with an outlet of ... | $3,700 |
 | 15' Auger This auger is 15' long x 13" diameter and is powered by a 1/2 hp electric motor.... | $3,500 |
 | 15' Incline Conveyor with Cleated Belt 15' long x 24" wide incline conveyor with cleated belting. Powered by a 1.5 hp, 240/460 V, 3-phase electric motor. 24" wide heavy-duty be... | $5,800 |
 | 150 hp Electric Motor This is an Ajax Electric Motor Corp. Model AE-150-1200 continuous-duty electric motor, 150 hp, 230/460 volts, 1185 rpm. ... | $1,800 |
 | 18' Incline Conveyor This covered conveyor is 18'-6" long and is powered by a 3 hp, 208-230/460 V, 3-phase electric motor. It is equipped with a 25" belt with... | $9,800 |
 | 18' Incline Conveyor 18' long x 33" wide incline conveyor. Powered by a 2 hp, 208-230/460 V, 3-phase electric motor. 29 1/2" belt. 10" side skirting. Di... | $3,400 |
 | 18' Incline Conveyor 18' long x 33" wide incline conveyor. Powered by a 2 hp, 208-230/460 V, 3-phase electric motor. 4" side skirting. Good condition.... | $3,800 |
 | 18' Incline Conveyor with Cleats 18' long x 36" wide incline conveyor with 3" cleats spaced 36" apart. 16" side skirting. Powered by a 2 hp, 208-230/460 V, 3-... | $8,800 |
 | 20' Auger This auger is 20' long x 8" diameter and is powered by a 1/3 hp electric motor.... | $3,200 |
 | 20' Auger This auger is 20' long x 6" diameter and is powered by a 1/2 hp electric motor.... | $3,250 |
 | 20x80 Stainless Steel Conveyor with Vibrating Chute This unit is a 20x80 Eriez stainless steel conveyor with vibrating chute, powered by a 1/2-hp, 208-230/480V three-phase Leeson gear motor with Warner ... | $4,800 |
 | 21' Conveyor This 21' long x 42" wide conveyor is powered by a 2-hp, 208-230/460 volt, three-phase electric motor. It is equipped with a 37-1/2" wide ... | $9,250 |
 | 25-hp Electric Motor This SEW Eurodrive continuous-duty motor is C-faced, 25-hp, 230/460 volts, 1752 rpm, type RF102DV180M.... | $750 |
 | 25-hp Electric Motor This is an SM-Cyclo continuous-duty motor:Â C-faced, 25-hp, 230/460 volts, 60 hz, 1770 rpm, frame G180M.... | $750 |
 | 3" Galvanized Steel Pipe This is a large lot (1000' available) of 3" galvanized steel (ID) water pipe with saddle-joint (non-threaded) ends. Majority of pipe is in 21'... | $3,800 |
 | 40-hp Blower This blower is powered by a 40-hp, 240/460v three-phase electric motor. Side outlet is 18-1/2" diameter, top outlet is 16-1/4" diameter. ... | $3,450 |
 | 5' x 24 This 5' long x 24" wide EMI Corp. Conveyor is powered by a 1/2-hp three-phase electric motor.... | $2,250 |
 | 650 KW Wood-Fired Power Plant Wood-fired steam generating power plant complete with all buildings, one 600-hp 300-lb. rated hybrid boiler (water-tube with fire-tube). System has au... | $295,000 |
 | 7' Screw Auger This screw auger is 7' long x 10" diameter, is powered by a 1-hp electric motor, and comes equipped with an infeed spout.... | $3,400 |
 | 70' Indirect Fire Municipal Solid Waste Dryer with Vapor Recovery Unit This unit is a 70' Indirect Fire Municipal Solid Waste (MSW) Dryer with Vapor Recovery Unit that includes one 70' cor-ten rotary dryer, combustion c... | $2,350,000 |
 | 8' Screw Auger This screw auger is 8' long x 10" diameter, is powered by a 1-hp electric motor, and comes equipped with an infeed spout.... | $3,400 |
 | 8' Matthews Incline Conveyor Matthews 8' long x 20" wide incline conveyor with 3" side rails, powered by a 1/2-hp, 220/480 volt, three-phase electric motor. Like new ... | $2,750 |
 | AAF - Arrestall Baghouse/Dust Collection System This unit is an American Air Filter (AAF) - Arrestall baghouse/dust collector, self-contained dust arrester. 3200 CFM. Complete system with fans, moto... | $6,800 |
 | Alsteele Granulator Knives These are brand new knives for Alsteele Model 1018, 1218, or 1119 granulators. Includes two fly knives and two bed knives - 17.985" long. The fly k... | $400 |
 | Alvey 12' x 16 This 12' long x 16" wide Alvey belt conveyor is powered by a 1/2-hp three-phase electric motor. Comes with controls. Good condition.... | $2,300 |
 | Blackmer Model X3E Pump This skid-mounted pump is powered by a 10-hp, 1765 rpm, 208-230/460 volt, three-phase electric motor with a Dodge DR 200A speed reducer. Capacity of 1... | $14,500 |
 | Blower Application Model 25-4 Blower Blower Application Model 25-4 Blower, powered by 15 hp, 208-230/460 volts, 1765 rpm,42.2-39.2/19.6 amps, electric motors, on-off switch. Good Conditio... | $1,950 |
 | Broce Model RJ350 8' Broom Sweeper Broce Model RJ350 8' Broom Sweeper powered by a John Deere 404DF150B Engine; 4 cylinder engine, NEW 8' wide broom, controls, good tires, only 3000... | $12,800 |
 | Burner & Blower The blower is a General Combustion Model FP-86-O powered by a 50-hp, 230/460 volt, three-phase electric motor. It is also equipped with a Combotronic ... | $22,700 |
 | Can Flattener/Blower This can flattener's crushing mechanism is powered by a 7.5-hp, 230/460 volt, three-phase electric motors. The Chicago blower is powered by a 10-hp, ... | $7,900 |
 | CECO Fiber Bed Mist Collector This CECO fiber bed mist collector is a Model DLM and is approximately 42" diameter, 205" high, and is constructed with stainless steel. I... | $15,000 |
 | CECO Fiber Bed Mist Collector This CECO fiber bed mist collector is approximately 28" diameter, 100" high, and is constructed from carbon steel. It is also equipped wit... | $13,500 |
 | Champion Products Model 1800 Blower This blower is powered by a 20-hp, 208-230/460v three-phase electric motor. The side outlet is 14" diameter, top outlet is 13-1/2" wide x ... | $3,250 |
 | Cincinatti Model RBE-17 Fan This Cincinatti fan is powered by a 30-hp, 208-230/460 volt, 78-72/36 amps, three-phase electric motor.... | $3,800 |
 | Complete Wire Chopping Line This complete wire chopping line can process 500-800 lbs. per hour and includes one refurbished 25-hp heavy-duty granulator with one new separation sy... | $87,500 |
 | Conveyor Drive Unit This used conveyor drive unit is powered by a 2-hp three-phase electric motor. It has a 19" wide x 12" diameter head pulley and a shaft-mounted Dodg... | $1,250 |
 | Corwell Model 262 -BLO Blower This Corwell Model 262-BLO Blower is powered by a 20 hp, 230/460 volts,1755 rpm 51.0/25.5 amps electic motors with on-off switch. Good Condition.... | $1,950 |
 | Cotta Transmission This unit is a Cotto Model GR200-5 single-speed transmission, SN 168814. The tag shows a stamp of GR975200. This transmission was taken out of a Mor... | $6,800 |
 | Custom Equipment Hybrid 1030 Scissor Lift Custom Equipment Hybrid 1030 Lift - lifts 750 pounds. Side-out deck extension, with slip-resistant surface, non-marking tires, working height 10', co... | $5,900 |
 | Custom Equipment Hybrid 1030 Scissor Lift Custom Equipment Hybrid 1030 Lift - lifts 750 pounds. Side-out deck extension, with slip-resistant surface, non-marking tires, working height 10', co... | $5,900 |
 | Davis Model HD-30 Batch Mixer This batch mixer is powered by a 25 hp, three phase electric motor.The tank is 8\' x 4\" long x 4\' 3\" wide with a mixing capacity ... | $14,500 |
 | ECO Flock 1000 System with Curing Tunnel The ECO Flock 1000 System consists of a three, steel roller, distribution system. There are two flocking sieves and four collecting drawers for flocki... | $19,750 |
 | Filter Press This 10' filter press is equipped with 24" plates. There are 45 plates.... | $15,000 |
 | Galland Henning 30DC Dual Compression Baler (Briquetter) Galland Henning 30DC Dual Compression Baler/Briquetter.Powered by a 50 hp 480 v/3 phase electric motor, dual compression configuration offered in two-... | $109,000 |
 | Granite Environmental Model SS-48 Oil Drum Skimmer This Granite Environmental Model SS-48 oil drum skimmer with drum head is powered by a hydraulic-driven Von Ruden motor with a 1-hp Delta power hydrau... | $29,500 |
 | Green Heck Model SWB-22S Blower Green Heck Model SWB-22S Blower, powered by 1/2 hp, 208 - 230/460 volts Electric motors, On-off switch, Good Condition.... | $1,650 |
 | Gruendler 12x12 Delumper This unit is powered by a 15-hp, 230/460 volt, 1765 rpm electric motor. It has a 12" x 12" feed opening, 1" screen, and stainless steel housing.... | $7,500 |
 | HAMM Raco Model R350 Soil Stabilizer This HAMM Raco R350 is a soil stabilizer with hydro statically driven milling and mixing rotor.Powered by a 490 HP Deutz diesel water cooled engine, 8... | $165,000 |
 | Hauck WHG 120B Hugger Gas Burner HIGH FIRE: Max Input @ 10% Excess Air (Btu/Hr): 660,000; Max Air Flow @ 16 osig (scfh): 6,820; Min. Input @ Max. Air Flow (Btu/hr) 144,800; Max Exce... | $1,685 |
 | Haybuster IG 11 Spare Parts This lot of Haybuster IG 11 spare parts includes 40 - sets of 2 and 1 single hammers, 22- shafts, 6 - screens with 4 inch holes, 2 - screens with 2 in... | $4,800 |
 | Heavy-Duty Rotary Valve/Feeder This heavy-duty rotary air lock valve/feeder has an inside diameter of 17-1/2" and an outside diameter of 25". It is powered by a chain-dr... | $11,700 |
 | Heil 24' Triple Pass Dryer Heil 24' long X 8' diameter Triple Pass Rotary Kiln Dryer with a 12' long X 5' diameter (refractory lined) burner with combustion chamber. Inclu... | $118,000 |
 | Hyster Model H80C 8000-lb. Forklift This unit is a Hyster Model H80C 8000-lb side-shift forklift with an 8' mast that will lift 16' high, 46" forks, dually-pneumatic tires. Good ... | $9,800 |
 | Mac Saturn 52x40 Shredder Components These are the major components of a Mac Saturn 52x40 slow-speed/high-torque shredder. It includes a 52"x46" shredder cutting chamber. There are fou... | $4,800 |
 | Material Transfer Bulk Bag Filling System This unit is a Material Master 5353-AF bulk bagging system that comes equipped with a Salina Vortex Quantum Model GRA10-F-S4 orifice gate vale and a R... | $14,500 |
 | Mayfran 35' Steel Belted Infeed Conveyor Mayfran 35' long x 36" steel belted conveyors with 2" steel cleats spaced every foot.11' horizontal x 22' incline x 3' discharge horiz... | $29,500 |
 | MetalFab Model PB8-750 Posibin Hopper This Posibin dump hopper is a combination 750-cubic-foot bin with an 8' diameter bin activator. Carbon steel construction. It is equipped with a 3-hp... | $12,500 |
 | MicroAir Clean Air Systems Model RP8-2 Dust Collector This MicroAir Clean Air Systems dust collector is powered by a 30-hp, 208-230/460 volt, 74-68/34 amp, three-phase electric motor. Â Typically 5,000-1... | $7,800 |
 | Mission Magnum Pump This skid-mounted pump is powered by a 75-hp, 1765 rpm, 230/460 volt, three-phase electric motor. 13" open impeller, size 4x3x13, with explosion... | $19,800 |
 | New London Engineering Model 500 Incline Conveyor This incline conveyor is 6' long x 8" wide and is powered by a 1/2-hp 208-230/460 volt electric motor with a standard speed of 60 FPM. It is eq... | $1,500 |
 | Novatec Vacuum Power Unit with Cyclone This Novatec Model VPU-15 vacuum power unit is powered by a 15-hp electric motor and comes equipped with a Universal RAI blower and cyclone. 3" ... | $6,750 |
 | Oil/Water Separator Tank This oil/water separator tank is one large 54" fiberglass cylinder with 20" funnel cone, stand-mounted with lid. 74" across = 1130 U... | $3,850 |
 | Oil/Water Separator Tank This oil/water separator tank is one small 52" fiberglass cylinder with 10" funnel cone, stand-mounted with NO lid. 18" across = 61 ... | $1,970 |
 | Oil/Water Separator Tank This oil/water separator tank is one large 6' tall fiberglass cylinder with NO lid. 6' across = 1322 U.S. gallons. Made by EFI Edwards Fiberglass, I... | $3,100 |
 | Oil/Water Separator Tank This oil/water separator tank is one medium 48" fiberglass cylinder with 18" funnel cone, stand-mounted with lid. 36" across = 238 U... | $2,300 |
 | Paddle Conveyor This 13-1/2' long x 26" wide paddle conveyor is powered by a 10-hp electric motor and is in good condition.... | $3,970 |
 | Powerscreen Mark II 28' Incline Conveyor Powerscreen Mark II conveyor 27' 8" long x 26" wide incline conveyor with 13' to 16' discharge height. 18" belt with side skirtin... | $14,500 |
 | Powerscreen Model Mark II - 44' Incline Conveyor Powerscreen Model Mark II 44' long x 35" wide incline conveyor with 13' to 16' discharge height. 24" belt with side skirting. Feed hop... | $16,500 |
 | Prodeva Model 250 Can and Glass Crusher This unit is a Prodeva Model 250 can and glass crusher powered by a 5-hp, 230/460 volt, three-phase electric motor. In-feed hopper, controls. Crushes ... | $6,700 |
 | Shar Systems 5-hp Mixer ThisShar Systems Model DSCGK-50TNLFZ single-shaft mixer is powered by a 5-hp 230/460V electric motor and has a 1/4-cubic-yard capacity. It was used t... | $3,750 |
 | Shred Pax AZ80 Shaft This keyed shaft is 7' 1" long for a Shred Pax AZ 80 shredder with a cutting chamber of 32" x 62".It is 4.5" in diameter with... | $3,850 |
 | Skako Model 50E 60 This unit is a Skako Model 50E vibrating table powered by a 300 volt, single-phase electric motor. Vibrating table is 60" x 60", 38"... | $3,500 |
 | Slider Bed Conveyor This 10'-6" long x 12" wide slider bed conveyor is powered by a 1/3-hp, 115 volt, single-phase electric motor and comes equipped with a 10" wide belt.... | $900 |
 | SludgeMaster Piston Pump This unit is a SludgeMaster Model 4x12C-P hydraulic-driven piston pump powered by a 55-hp Isuzu diesel hydraulic power unit. The power unit is design... | $28,500 |
 | SludgeMaster Piston Pump This unit is a SludgeMaster Model 4x12C-P hydraulic-driven piston pump powered by a 30-hp, 240/480 volt, three-phase explosion-proof electric motor. I... | $32,500 |
 | Surge Hopper This surge hopper is approximately 2.5 cubic yards. The bin is 42" wide x 40" long x 72" deep with a 43-1/2" long x 8" w... | $6,500 |
 | TechAir Inc. Rotary Valve This rotary valve is a Model 12 ROTO SEAL S.F. and is powered by a 3/4-hp, 208-230/460-480v electric motor. Openings are 12" x 12", and 12... | $4,250 |
 | Three-Belt Conveyor This conveyor is powered by a 1.5-hp 230/460 volt electric motor. It is equipped with three 7"-wide conveyor belts. One belt is 11' long and two are 1... | $5,600 |
 | Tranter Superchanger Heat Exchanger This heat exchanger is a Model UFX-26-5-HP-44, serial number SC17152, and has a surface area of 137 square feet. Plate material is 304SS, 0.5mm thick,... | $6,500 |
 | Versa Ferguson 6'x8" Incline Conveyor This rubber-sidewall incline conveyor is 6' long x 8" wide with the sidewalls, 5" wide without the sidewalls. It is powered by a .33-hp single-phase e... | $2,700 |
 | Vibratory 22' x 4' Conveyor This 22' long x 48" wide heavy duty vibratory conveyor is powered by a 25-hp electric motor.The stand footprint is 15'9" long x 6'2&qu... | $19,750 |
 | Weinman Model 4L1W Pump This split-case, horizontal-mounted pump is a Model 4L1W-100-P26G-D powered by a 10-hp, 230/460 volts, 1170 rpm, three-phase electric motor. It comes... | $20,000 |
 | Whitlock Model 660 Blender Tri-component blender equipped with hopper/loader, controls and single-phase electric motor. Material is loaded into bins on top and fed at a specif... | $4,300 |