Found 53 Listings
Click on equipment name or thumbnail photo to view details.
Click on equipment name or thumbnail photo to view details.
The Impact 500 is designed to reduce the size of crumb rubber or buffings to as small as 100 mesh. The process involves freezing the rubber cryogenically,...
$175,000
This unit is an ITEC passenger tire debeader powered by a new 7.5 hp, 3-phase electric motor. New drive. New electric and pneumatic controls. 250-300 tires...
$6,800
This unit is a NEW Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$9,300
This unit is a Tuffman CBS 30" permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$9,800
This unit is a NEW Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$10,400
This unit is a Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with cleats...
$11,800
This unit is a NEW Tuffman CBS permanent crossbelt magnet powered by a 3/4 hp, 220/480 V, 3-phase electric motor. Belt is made of heavy-duty rubber with...
$13,500
This unit is a NEW Tuffman Model 722 stationary trommel screen powered by a 10 hp, 3-phase electric motor with a 25 to 1 gear reducer. Trommel barrel is...
$44,500
This unit is a Tuffman Model 722-P Portable trommel screen powered by a hydraulic drive motor driven by a diesel engine. Trommel barrel is 22' long x 7'...
$88,000
Barber Green Rotary Kiln with dryer; 24' long X 7' diameter rotary kiln with refractory brick lining and flightings, drive mechanism with trunions and...
$68,000
24' long x 66" diameter rotary kiln with steel flighting and 36" disc cone deflector. Large infeed is 52" opening and discharge is 9" x 9". 2 Allis Chalmers...
$84,000
48' long x 9' diameter rotary kiln. Carbon steel kiln with 10 1/2" flights and discharge chutes. Includes drive mechanism with 4 heavy duty trunions and...
$174,000
The 70' Indirect Thermal Distortion Unit was purpose build for tire pyrolysis and is capable of processing up to 80 ton of tires per day. The system distills...
$2,750,000
Al-Jon Model 20 Poprtable Car crusher- powered by a Detroit Model 471 diesel engine and comes equipped with controls, new seals recently installed and...
$28,500
One used BloApCo Model 3CAXS-3058H shredder powered by a 30 hp, 230/460v, 3 phase electric motor, with infeed conveyor- 62" wide x 78" long with 54" wide...
$18,500
Branick Tire Splitter Model HD-BTC tire cutter is powered by a 10-hp motor. New positioning cones, cone shafts, cone bearings, cone points, return spring,...
$8,500
Conair Granulator- Powered by a 15 hp, 230/460 V, 3-phase electric Baldor motor. Feed opening is 17 3/4" x 14 3/4". Open rotor. 1/4" screen. Controls....
$7,450
Conair Wortex Model JC10L Granulator- powered by a 15 hp, 230/460 V, 3-phase electric Baldor motor. Feed opening is 20 1/2" x 10" and side feed is 4" x...
$7,450
Conair Wortex Model JC10L Granulator- powered by a 15 hp, 230/460 V, 3-phase electric Baldor motor. Feed opening is 20 1/2" x 10" and side feed is 4" x...
$7,950
This unit is a Dyna-Mill Super Collider crumb rubber processor that is powered by a 7.5-hp, three-phase electric motor. It has the ability to take rubber...
$7,800
The ECO Flock 1000 System consists of a three, steel roller, distribution system. There are two flocking sieves and four collecting drawers for flocking...
$19,750
This unit is a Eidal Model 62x41 low speed/high torque shredder powered by a 200-hp, 480 volt, three-phase electric motor and comes equipped with a 62"...
$194,500
Eidal Model 72 X 41 slow speed-high torque shredder, equipped with at KYB 525S hydraulic pack with Dension pumps and a powered by two (2) 75 hp, 230/460...
$99,500
Eidal Model 72 X 41 slow-speed high-torque shredder, equipped with a KYB 525S hydraulic pack with Denison pumps and a powered by two (2) 75 hp, 230/460...
$127,500
Eldan Rasper Model 1200-1 shredder. Powered by a 120, 460V, 120 hp 3-phase electric motor, Infeed feed hopper, stand, controls, 12 flying knives, 3 static...
$84,500
EZ Model A+ Portable Car Crusher powered by a John Deer diesel engine, 10" bore cylinders (no leaks0, 4" rod shaft, straight walls, opening is 20' long...
$79,000
This heavy duty double roll crackermill is powered by a 400-hp motor. Front and rear rolls are 28" diameter x 42" face width cored type alloy cast iron...
$78,000
This is a Forsberg Model 200V Vacuum Gravity Separator, that is powered by a 1 hp electric drive motor, and 1/2hp electric motor for the vacuuum or suction....
$15,800
This vacuum separator assures a complete and accurate product density classification from the very lightest to the very heaviest.Easily adjustable divider...
$22,000
This screen is 60" x 84" with a 5-hp motor. Adjustable feed hopper assures consistent supply of product onto screen.the unit is a positive eccentric, high...
$46,000
This destoner separates dry material into specific weight fractions by a high speed eccentric deck motion and air being drawn through a presized screen.It...
$15,000
Heil 24' long X 8' diameter Triple Pass Rotary Kiln Dryer with a 12' long X 5' diameter (refractory lined) burner with combustion chamber. Includes Maxon...
$118,000
Itec Tire Debeader powered by a 7.5 hp, 230/460 volts, 3-phase electric motor.250 - 300 tires per hour production rate, all passenger and light truck commercial...
$8,800
This unit is an ITEC truck & passenger tire debeader powered by a 15-hp three-phase electric motor. 250-300 passenger tires per hour and 50 - 70 truck...
$18,500
These are the major components of a Mac Saturn 52x40 slow-speed/high-torque shredder. It includes a 52"x46" shredder cutting chamber. There are four...
$4,800
Mac Saturn 62 x 40 slow speed-high torque shredder with one 525 Hydrostar motor powered by two 150-hp, 230/460 volts, 3 phase electric motors. Throat...
$69,750
This unit is a Material Master 5353-AF bulk bagging system that comes equipped with a Salina Vortex Quantum Model GRA10-F-S4 orifice gate vale and a Rice...
$14,500
This Posibin dump hopper is a combination 750-cubic-foot bin with an 8' diameter bin activator. Carbon steel construction. It is equipped with a 3-hp...
$12,500
This Morbark Waste Recycleris powered by a 650-hp Cummins diesel engine and comes equipped with loader with grapple. Cab with controls. Fairly new chipper...
$54,000
National Tire Cutter Model 184TG Tire Cutter. Powered by a 5 hp, 115/208/280 V electric motor. Cuts passenger and small truck tires into quarter sections...
$9,800
This Novatec Model VPU-15 vacuum power unit is powered by a 15-hp electric motor and comes equipped with a Universal RAI blower and cyclone. 3" O.D. inlet...
$6,750
Proto Grind Model 1200 Portable Horizontal Grinder- Powered by a 425-hp Cummins diesel engine with the powerful Rot Drive System: hydraulically driven,...
$78,500
This portable rim crusher is powered by a 24-hp Honda engine, 17.7KW, and comes equipped with hydraulic system, and controls. Very little use - very good...
$7,800
This unit is a SSI Model 2000-H slow-speed/high-torque shredder with a KYB MRHD-540 hydraulic drive powered by two 150-hp three-phase electric motors built...
$79,900
This unit is a Stearns 30" DC lifting scrap magnet - 230 V.D.C., 15.5 amps. Harness and chains included. Good condition.
$7,800
Hydraulic drive hook/chain in-feed system. Can be mounted stationary or portable. Variable feed rates from 100-1000 tires per hour. "Like new" condition...
$5,500
TSI Model TC-100 Portable Tire Cutter. Powered by a 16 hp Briggs Electric Start engine, coil start, oil filter and low oil sensor. 28 gallon hydraulic...
$12,500
TSI Model TC-100 Portable Tire Cutter. Powered by a 16 hp Briggs Electric Start engine, coil start, oil filter and low oil sensor. 28 gallon hydraulic...
$12,500
This TSI TC 50 Tire Cutter is powered by a 5-hp, 208-230/460 V, 3-phase electric motor. Will cut passenger and light truck tires into four pieces -- 60...
$6,600
The TC-50 is designed to cut passenger and light truck tires. Easy to operate and maintain as or electric.
$11,600
This unit is a new Tuffman Model 830 stationary trommel screen powered by a 10-hp three-phase electric motor with a 25 to 1 gear reducer. Trommel barrel...
$68,500
This two-deck disc classifier is powered by a 3/4-hp, 208-230/460 volt, three-phase electric motor. Top deck has six shafts and bottom deck has four shafts,...
$7,500
Wurtex 9' x 5' Disc Screen- 9' long x 5' wide, Screen deck with 5 disc rollers on 11" centers, SEW 1.5 Kw drive on each Disc roll, 277/480V, 3-phase, 60Hz....
$18,000